Built for shops that have outgrown an 8" bandsaw, the 10" Woodworking Bandsaw with Scale adds resaw-grade depth capacity without sacrificing the compact footprint of a benchtop machine. An integrated measuring scale delivers repeatable precision on every cut, while the 0–45° tilting table extends the machine into angled ripping and beveled joinery work. A larger 〔254mm〕 wheel diameter improves blade tracking stability at higher cutting speeds, and the reinforced cast frame keeps vibration low even during extended resaw operations. Combined with efficient dust extraction, the OM-BS10 is engineered as the step-up bandsaw for cabinetmakers and small production shops that need more capacity without moving up to a full-size industrial unit.

Introduction

A 10 in Woodworking Bandsaw with Scale is a precision cutting machine designed for resawing and shaping thicker stock than standard 8" bandsaws allow. The built-in scale lets operators set accurate cut widths without secondary marking, while the extended 〔150mm〕 resaw depth opens up veneer-cutting and bookmatching work that smaller bandsaws cannot handle in a single pass.

Functionality and Benefits

Positioned between benchtop and full industrial machines, this bandsaw pairs a 〔3/4 HP〕 motor with a larger 254mm wheel for steadier blade tracking at cutting speed. The 0–45° tilting table supports angled and beveled cuts without repositioning the stock, and the reinforced frame keeps vibration low even during long resaw runs. Combined with efficient dust extraction, the OM-BS10 is built for shops that need more capacity than an 8" model without the footprint or cost of a full industrial bandsaw.

Core Features

1. Extended Resaw Capacity — 〔150mm〕 cut depth handles thicker stock than 8" models, ideal for resawing boards into veneer or bookmatched panels.

2. Precision Measurement System — Built-in scale enables accurate, repeatable results without secondary marking or measuring.

3. Variable Angle Capability — 0–45° tilting table supports beveled cuts and angled joinery in a single setup.

4. Enhanced Blade Tracking — Larger 254mm wheel diameter improves blade stability at cutting speed, reducing drift on long resaw cuts.

5. Vibration Control — Reinforced frame construction minimizes movement during extended operation.

6. Waste Management — 100mm dust outlet with vacuum compatibility keeps the cutting area clear for accurate line-following.

Benefits

• Fewer outsourced cuts — Deeper resaw capacity means thicker stock can be processed in-house instead of sent out, shortening lead times on custom work.

• Less material waste — Precision scale and stable blade tracking reduce mis-cuts, especially on veneer and bookmatched panels where waste is costly.

• Lower downtime — Reinforced frame and improved blade tracking reduce blade wander and premature wear, cutting maintenance frequency.

• Safer long-run operation — Reduced vibration keeps the cut line predictable during extended production runs, lowering operator fatigue and error risk.

• Right-sized investment — Delivers resaw capability closer to industrial machines without the capital cost or floor space of a full industrial bandsaw.

FAQ

What is the maximum resaw depth of the OM-BS10 10" bandsaw? 

The OM-BS10 has a maximum cut depth of 〔150mm (6")〕, allowing it to resaw stock significantly thicker than an 8" bandsaw in a single pass.

What size blade does a 10" woodworking bandsaw use? 

The OM-BS10 accepts blades from 3mm to 16mm wide, with a blade length of 〔1712mm〕, suitable for both fine curve-cutting and straight resaw work.

Is the 10" bandsaw suitable for small workshops? 

Yes. Despite its increased resaw capacity, the OM-BS10 retains a benchtop footprint with a 〔380mm x 380mm〕 work surface, making it suitable for workshops with limited floor space.

What is the difference between the 8" and 10" OMEGA bandsaw models? 

The 10" model (OM-BS10) offers deeper resaw capacity (〔150mm〕 vs 80mm) and a larger 254mm wheel diameter for improved blade tracking, compared to the 8" model (OM-BS8). Both share the same 0–45° tilting table and integrated measuring scale.